Funkwerk bintec R1200 User Manual page 51

WAN Partner
Field
Source Port
Destination Port
Table 5-5: ADDEXT menu fields
The M field includes the following selection options:
ODE
Description
always
dialup wait
dialup continue
up only
Table 5-6: M selection options
ODE
The S and D
P
OURCE ORT ESTINATION
options:
Description
any (default value)
specify
specify range
priv (0...1023)
Description
Only for P = tcp or udp
ROTOCOL
Source port number or range of source port
numbers.
Only for P = tcp or udp
ROTOCOL
Destination port number or range of destination
port numbers.
Meaning
Always use the route.
Use the route if the interface is "up". If the inter-
face is "dormant", dial and wait until the inter-
face is "up". Otherwise reroute.
Use the route if the interface is "up". If the inter-
face is "dormant", dial but reroute until the inter-
face is "up". Otherwise reroute.
Use the route if the interface is "up". Otherwise
reroute.
fields contain the following selection
P
ORT
Meaning
➤➤
The route is valid for all
Enables the entry of a port number.
Enables the entry of a range of port numbers.
Privileged port numbers: 0 ... 1023.
5
Submenu IP
port numbers.
bintec User's Guide 49