Funkwerk bintec R1200 User Manual page 46

5
Submenu IP
44 bintec User's Guide
The IP routes for a specific WAN Partner are listed in the WAN P
➜
M R menu:
ORE OUTING
R3000w Setup Tool
[WAN][ADD][IP][ROUTING]: IP Routing (branch)
The flags are: U (Up), D (Dormant), B (Blocked),
G (Gateway Route), I (Interface Route),
S (Subnet Route), H (Host Route), E (Extended Route)
Destination Gateway
192.168.1.0 192.168.100.2 255.255.255.0 DG
192.168.100.2 192.168.100.1 255.255.255.0 DH
ADD ADDEXT
F shows the current status (Up, Dormant, Blocked) and the type of route
LAGS
(Gateway Route, Interface Route, Subnet Route, Host Route, Extended
Route). The protocol with which your gateway has "learned" the routing entry is
displayed under P , e.g. loc = local, i.e. manually entered.
RO
More routes are added in the WAN P
menu. Existing entries can be edited by tagging the desired list entry and press-
ing the Return key.
R3000w Setup Tool
[WAN][EDIT][IP][ROUTING][EDIT]
Route Type
Network
Destination IP Address
Netmask
Gateway IP-Address
Metric
SAVE
Funkwerk Enterprise Communications GmbH
Mask Flags Met. Interface
1
1
DELETE
➜ ➜
IP M
ARTNER ORE
Funkwerk Enterprise Communications GmbH
Network route
WAN with transit network
192.168.1.0
255.255.255.0
192.168.100.2
0
CANCEL
➜
IP
ARTNER
MyGateway
Pro
branch loc
branch loc
EXIT
➜
R ADD
OUTING
MyGateway
WAN Partner