Funkwerk bintec R1200 User Manual page 28

3
Submenu Advanced Settings
26 bintec User's Guide
Field
Gear Up Threshold
Gear Down Threshold
D-Channel Queue Length
Description
Only for M = Bandwidth On Demand
ODE
Enabled / BAP, Active Mode / BAP, Passive
Mode / BAP, Active and Passive Mode / BAP,
Client Active Mode / BAP, Dialup Server Mode
Utilization threshold in percent at which another
ISDN B-channel is added for a connection.
Only for M = Bandwidth On Demand
ODE
Enabled / BAP, Active Mode / BAP, Passive
Mode / BAP, Active and Passive Mode / BAP,
Client Active Mode / BAP, Dialup Server Mode
A B-channel is dropped as soon as the remain-
ing connection has a load measured in percent
that is lower than the value adjusted in this
field.
The default value is 80.
(Only if L 1 P
AYER ROTOCOL
➜
P A S
ARTNER DVANCED ETTINGS
See data sheet on www.funkwerk-ec.com
check whether your gateway supports AO/DI.
Only for M = Bandwidth On Demand
ODE
Enabled / BAP, Active Mode / BAP, Passive
Mode / BAP, Active and Passive Mode / BAP,
Client Active Mode / BAP, Dialup Server Mode
Threshold value for the number of bytes accu-
mulated in the buffer of the D-channel at which
the system is to change to the B-Channel
Mode.
Default value is 7500.
= AO/DI in the WAN
menu)
to
WAN Partner