Funkwerk bintec R1200 User Manual page 44

5
Submenu IP
42 bintec User's Guide
Field
Default Route
Remote IP Address
Remote Netmask
Table 5-1: B IP S
ASIC ETTINGS
For an xDSL connection via PPTP, e.g. by Telekom Austria, PPP over PPTP is
➜
set in WAN P ADD/EDIT
ARTNER
Then the B IP-S
ASIC ETTINGS
Field
PPTP VPN Partner's IP
Address
via IP Interface
Use Gateway
Description
Only if dynamic client, no or yes is set for IP
T N . Possible values:
RANSIT ETWORK
■
yes: Route to this WAN partner is defined
as default route.
■
no (default value): Route to this WAN part-
ner is not defined as default route.
Only if yes or no is set for IP T
WAN partner's LAN IP address.
Only if yes or no is set for IP T
WAN partner's LAN netmask.
menu fields
➜
A S
DVANCED ETTINGS
menu consists of the following fields:
Description
Here you enter the IP address of the PPTP
remote terminal of your Internet Service Pro-
vider (=ISP).
This field is displayed if an IP address has been
entered into the field PPTP VPN P
A .
DDRESS
Here you select the IP interface via which pack-
ets from/to the PPTP remote terminal are trans-
ported.
This field is displayed, when an ETH interface
has been selected in V
IA
Defines whether the PPTP tunnel is carried out
via another gateway. Default value is no, which
should only be modified in special applications.
N .
RANSIT ETWORK
N .
RANSIT ETWORK
➜
L 1 P .
AYER ROTOCOL
' IP
ARTNER S
IP I .
NTERFACE
WAN Partner