Funkwerk bintec R1200 User Manual page 47

WAN Partner
➜
The M R ADD/EDIT menu consists of the following fields:
ORE OUTING
Field
Route Type
Network
Destination IP Address
Netmask
Gateway IP Address
Partner / Interface
Description
Type of route. Possible values:
■
Host route (default value): Route to a single
host
■
Network route: Route to a network
■
Default route: The route is applied for all IP
addresses and if no other suitable route is
available.
Defines the type of connection. For possible
values see table "Selection options in Network
field," on page 46.
The displayed value cannot be modified in this
menu. It depends on the setting of IP T
N in WAN P
ETWORK ARTNER
➜
B IP-S .
ASIC ETTINGS
Only for R T = Host route or Network
OUTE YPE
route.
IP address of the destination host or network.
Only for R T = Network route
OUTE YPE
Netmask for D IP A
ESTINATION
If no entry is made the gateway uses a stan-
dard netmask.
Only for N = WAN with transit network.
ETWORK
IP address of the host to which your gateway
should forward the IP packets.
Only for N = WAN without transit
ETWORK
network
Displays the WAN partner. Field cannot be
modified.
Submenu IP
RANSIT
➜ ➜
ADD/EDIT IP
DDRESS
bintec User's Guide 45
5