Funkwerk bintec R1200 User Manual page 8

1
WAN Partner Menu
6 bintec User's Guide
Field
Encapsulation (cont.)
Encryption
Compression
Description
■
X.25 No Configuration, No Signaling
As not all bintec devices support all protocols,
please check prior to configuration the avail-
ablity of the respective protocol according to
the data sheet at www.funkwerk-ec.com.
Defines the type of encryption that should be
used for data traffic to the WAN partner. Only
possible if STAC resp. MS-STAC compression
is not activated for the connection. Possible val-
ues: see table "Encryption selection options,"
on page 8.
If E is set, this function must also be
NCRYPTION
activated at the remote gateway, otherwise the
connection cannot be established.
Defines the type of compression that should be
used for data traffic to the WAN partner and is
only active when supported by the remote gate-
way. Possible values:
■
STAC, MS-STAC, MPPC: These values are
only available if E
NCAPSULATION
set to PPP, Async PPP over X.75, Async
PPP over X.75/T.70/BTX, Async PPP over
V.120 (HSCSD) or X.25_PPP.
■
V.42bis: For E
NCAPSULATION
(only IP) and Multi-Protocol LAPB Framing
only V.42bis compression is available.
has been
LAPB Framing
WAN Partner