Funkwerk bintec R1200 User Manual page 27

WAN Partner
The E I S
XTENDED NTERFACE
Field
Mode
Line Utilization Weighting
Line Utilization Sample
(sec)
Submenu Advanced Settings
menu consists of the following fields:
ETTINGS
Description
Only for WAN P
ARTNER
➜
C -B
HANNEL UNDLING
Defines which mode is used for BOD. Possible
values: see table "Mode selection options," on
page 33.
Only for M = Bandwidth On Demand
ODE
Enabled / BAP, Active Mode / BAP, Passive
Mode / BAP, Active and Passive Mode / BAP,
Client Active Mode / BAP, Dialup Server Mode
Defines how the line utilization is calculated.
The load is calculated every 1 second. Possible
values:
■
equal (default value): All the measured val-
ues of throughput in L
S ( ) are weighted equally for the
AMPLE SEC
calculation.
■
proportional: The last measured values of
throughput are weighted more heavily for
the calculation, i.e. in L
S ( ) the calculation is most heavily
AMPLE SEC
influenced by the last measured values.
Only for M = Bandwidth On Demand
ODE
Enabled / BAP, Active Mode / BAP, Passive
Mode / BAP, Active and Passive Mode / BAP,
Client Active Mode / BAP, Dialup Server Mode
Time interval in seconds. Throughput measure-
ments in L U
INE TILIZATION
included in the calculation of the line utilization
(the load is calculated every 1 second). Possi-
ble values: 5 to 300 (default value: 5).
➜
A S
DVANCED ETTINGS
= dynamic
U
INE TILIZATION
U
INE TILIZATION
S ( ) are
AMPLE SEC
bintec User's Guide
3
25