Synchronizing The Carburetors - Yamaha FZS600'98 Service Manual

ADJUSTING THE VALVE CLEARANCE/

SYNCHRONIZING THE CARBURETORS

14. Install:
S cylinder head cover
S spark plugs
Bolt (cylinder head cover):
10 Nm (1.0 mSkg)
Spark plug:
13 Nm (1.3 mSkg)
EB303010
SYNCHRONIZING THE CARBURETORS
NOTE:
Prior to synchronizing the carburetors, the
valve clearance and the engine idling speed
should be properly adjusted and the ignition
timing should be checked.
1. Stand the motorcycle on a level surface.
NOTE:
Place the motorcycle on a suitable stand.
2. Remove:
S cap
3. Install:
S vacuum gauge 1
S engine tachometer 2
(to the spark plug lead of cyl. #1)
Vacuum gauge
90890-03094
Engine tachometer
90890-03113
4. Start the engine and let it warm up for sever-
al minutes.
5. Check:
S engine idling speed
Out of specification ! Adjust.
Refer to "ADJUSTING THE ENGINE ID-
LING SPEED".
Engine idling speed
1,150 X 1,250 r/min
3-11
CHK
ADJ