Yamaha FZS600'98 Service Manual page 320

EB803020
TROUBLESHOOTING
IF THE HEADLIGHT, HIGH BEAM INDICATOR LIGHTS, TAILLIGHT, AUXILIARY LIGHT
AND/OR METER LIGHT FAIL TO COME ON:
Procedure
Check:
1. Fuses (main and head)
2. Battery
3. Main switch
4. Lights switch (for Europe)
NOTE:
S Remove the following part(s) before trouble-
shooting:
1) Seat
2) Fuel tank
3) Side cover (left)
4) Front cowling assembly
S Use the following special tool(s) for trouble-
shooting.
EB802011
1. Fuses (main and head)
S Remove the fuses.
S Connect the pocket tester (Ω X 1) to the
fuses.
S Check the fuses for continuity.
EB802012
2. Battery
S Check the battery condition.
Refer to "BATTERY INSPECTION" in
CHAPTER 3.
Open-circuit voltage:
12.8 V or more at 20_C
CONTINUITY
CORRECT
:
LIGHTING SYSTEM
5. Dimmer switch
6. Pass switch (for Europe and Australia)
7. Wiring connections (the entire lighting
system)
Pocket tester:
90890-03112
NO CONTINUITY
Replace the fuses.
INCORRECT
S Clean the battery terminals.
S Recharge or replace the battery.
8-30
ELEC