Yamaha FZS600'98 Service Manual page 333

EB806023
3. If the turn signal light and/or turn indicator
light fails to blink:
1. Bulb and bulb socket
S Check the bulb and bulb socket for continu-
ity.
2. Turn switch
S Disconnect the left handlebar switch cou-
plers from the wire harness.
S Check for continuity as follows:
Brown/White 1 – Chocolate
Brown/White 1 – Dark green
3. Voltage
S Connect the pocket tester (DC 20 V) to the
flasher relay coupler.
Tester (+) lead ! Brown terminal
Tester (–) lead ! Frame ground
S Turn the main switch to "ON".
S Check the voltage (12 V) of the "Brown"
lead at the flasher relay terminal.
CONTINUITY
2
3
CONTINUITY
1
1
MEETS
SPECIFICATION
:
SIGNAL SYSTEM
NO CONTINUITY
Replace the bulb and/or bulb socket.
NO CONTINUITY
Replace the left handlebar switch.
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
flasher relay connector is faulty, repair it.
8-43
ELEC