Yamaha FZS600'98 Service Manual page 49

A Use a plastic clamp to fasten
the handlebar switch lead (left),
main switch lead, clutch cable
and starter cable to the frame.
B Use a plastic band to fasten
together wireharness, starter
motor lead, AC magneto lead,
sidestand switch lead and oil
level/ neutral switch lead, then
hold the clamp to the frame
bracket.
CABLE ROUTING
Position the band end to out side of
chassis.
C Use a plastic locking tie to
fasten the starter motor lead,
AC magneto lead, sidestand
switch lead and oil level / neutral
switch lead to the frame bracket.
Cut off the excess end of the tie.
2-27
SPEC
D Use a steel holder to fasten
together the AC magneto lead,
sidestand lead and oil
level/ neutral switch lead.
E Use a plastic clamp to fasten
the horn lead and air guide
plate to the frame.