Changing The Engine Oil - Yamaha FZS600'98 Service Manual

CHECKING THE ENGINE OIL LEVEL/

CHANGING THE ENGINE OIL

TEMP
SAE 10W-30
SAE 10W-30
SAE 10W-30
2
Recommended engine oil
Refer to the chart for the
engine oil grade which is best
suited for certain atmospheric
temperatures.
API standard !
SE or higher grade
ACEA standard ! G4 or G5
CAUTION:
S Engine oil also lubricates the clutch and
the wrong oil types or additives could
cause clutch slippage. Therefore, do not
add any chemical additives or use
engine oils with a grade of CD a or
higher and do not use oils labeled
"ENERGY CONSERVING II" b or higher.
S Do not allow foreign materials to enter
the carankcase.
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
NOTE:
Before checking the engine oil level, wait a
few minutes until the oil has settled.
EB303081
CHANGING THE ENGINE OIL
1. Start the engien, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
S engine oil filler cap 1
S engine oil drain bolt 2
(along with the gasket)
4. Drain:
S engine oil
(completely from the crankcase)
5. If the oil filter cartridge is also to be replaced,
perform the following procedure.
3-19
CHK
ADJ