Special Tools - Yamaha FZS600'98 Service Manual

Tool No.
90890-01268 Ring nut wrench
This tool is used to loosen and tighten the
steering ringnut.
90890-01304 Piston pin puller
This tool is used to remove the piston pin.
90890-01460 Damper rod holder
-01326 T-handle
These tool ar used for holding the damper rod
when removing or installing the damper rod.
90890-01312 Fuel level gauge
This gauge is used to measure the fuel level
in the float chamber.
90890-01325 Radiator cap tester
-01352 Adaptor
These tools are used for checking the cooling
system.
90890-01362 Flywheel puller
-01382 Crank shaft protector
These tools are used for removing the rotor
and starter clutch.
90890-01367 Fork seal driver weight
-01381 Fork seal driver attachment (ø41 mm)
These tools are used when installing the
forkseal.
Tool name/Usage
1
2
1
2
1
2
1-5

SPECIAL TOOLS

EB104000
SPECIAL TOOLS
The following special tools are necessary for
complete and accurate tune-up and assembly.
Use only the appropriate special tools as this will
help prevent damage caused by the use of
inappropriate tools or improvised techniques.
When placing an order, refer to the list provided
below to avoid any mistakes.
1
GEN
INFO
Illustration