Yamaha FZS600'98 Service Manual page 265

FRONT FORK
4. Install:
S outer tube bushing 1
(with the fork seal driver weight 2 and
adapter 3 )
Fork seal driver weight 2
90890-01367
Adapter 3
90890-01381
5. Install:
S washer
S oil seal 1
(with the fork seal driver weight 2 and
adapter 3 )
Fork seal driver weight 2
90890-01367
Adapter 3
90890-01381
CAUTION:
Make sure that the numbered side of the
oil seal, faces up.
NOTE:
S Before installing the oil seal, apply lithium
soap base grease onto its lips.
S Apply fork oil onto the outer surface of the
inner tube.
6. Install:
S oil seal clip 1
NOTE:
Adjust the oil seal clip so that it fits into the
outer tube's groove.
7. Install:
S dust seal 1
(with the fork seal driver weight) 1
Fork seal driver weight
90890-01367
8. Fill:
S front fork leg
(with the specified amount of the recom-
mended fork oil)
Quantity (each front fork leg)
0.475 L
Yamaha fork and shock oil
10 W or equivalent.
Front fork leg oil level a (from
the top of the inner tube, with
the inner tube fully compressed
and without the fork spring)
121 mm
7-46
CHAS