Electric Starting System - Yamaha FZS600'98 Service Manual

Table of Contents

Advertisement

EB803020
TROUBLESHOOTING
IF THE STARTER MOTOR FAILS TO OPERATE:
Procedure
Check:
1. Fuses (main and ignition)
2. Battery
3. Starter motor
4. Starting circuit cut-off relay
5. Starter relay
6. Main switch
7. Engine stop switch
NOTE:
S Remove the following part(s) before trouble-
shooting:
1) Seat
2) Fuel tank
3) Side cover (left)
S Use the following special tool(s) for trouble-
shooting.
EB802011
1. Fuses (main and ignition)
S Remove the fuses.
S Connect the pocket tester (Ω X 1) to the
fuses.
S Check the fuses for continuity.
EB802012
2. Battery
S Check the battery condition.
Refer to "BATTERY INSPECTION" in
CHAPTER 3.
Open-circuit voltage:
12.8 V or more at 20_C

ELECTRIC STARTING SYSTEM

CONTINUITY
CORRECT
:
8. Neutral switch
9. Sidestand switch
10. Clutch switch
11. Start switch
12. Diode (starting circuit cut-off relay)
13. Wiring connection (the entire starting
system)
Pocket tester:
90890-03112
NO CONTINUITY
Replace the fuses.
INCORRECT
S Clean the battery terminals.
S Recharge or replace the battery.
8-15
ELEC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents