Yamaha FZS600'98 Service Manual page 325

S Turn the main switch to "ON".
S Turn the lights switch to "ON" or "PO".
S Check the voltage (12 V) of the "Blue" lead
on the bulb socket connector.
This circuit is not faulty.
EB805023
4. If the auxiliary light fails to come on:
1. Bulb and bulb socket
S Check the bulb and bulb socket for continu-
ity.
2. Voltage
S Connect the pocket tester (DC 20 V) to the
bulb socket connector.
Tester (+) lead ! Blue/Red terminal
Tester (–) lead ! Black terminal
S Turn the main switch is "ON".
S Turn the lights switch to "ON" or "PO".
S Check the voltage (12 V) of the "Blue/Red"
lead on the bulb socket connector.
This circuit is not faulty.
LIGHTING SYSTEM
MEETS
SPECIFICATION
CONTINUITY
1
2
MEETS
SPECIFICATION
8-35
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
bulb socket connector is faulty, repair it.
NO CONTINUITY
Replace the bulb and/or bulb socket.
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
bulb socket connector is faulty, repair it.
ELEC