Wireless/Wired Lan's Operation Check (Emp-1825/1815 Only) - Epson EMP-1825 Service Manual

EMP-1825/EMP-1815/EMP-1810

3.3.11 Wireless/Wired LAN's Operation Check (EMP-1825/1815 only)

Is Easy MP window displayed?
1. Restart the projector.
2. Re-configure the Easy MP
farmware by download it again.
Apply each remedy above from the top. If it does not work, go on to the next remedy.
For more information, refer to
Board Assy.*3 /CF Slot Assy.*3/USB Board Assy.*3" (p. 29)
Engine and MAB (1) (MA Board Assy.)" (p. 20)
MAB (2) (Optical Engine)" (p. 42)
Flowchart 3-13 Wireless/Wired LAN's Operation Check (EMP-1825/1815 only)
SEIKO EPSON
Start
NG
NG
NG
4.4.1.2. "Removing the SB Assy. IM*1 (IS Board Assy.*2)/IM
1. Is the connected-to-network simbol
displayed on PC's monitor?
2. Is the projector recognized on PC's
EMP monitor?
NG
1. Re-set Wireless LAN correctly.
NG
2. Re-configure the network
with Easy MP.
NG
3. Check the setting of EMP
monitor on PC again.
NG
4. Replace Wireless LAN.
NG
5. Replace USB board Assy.
NG
6. Replace Optical Engine
and MAB set.
/ 4.4.1 "Removing the Optical
/ 4.4.3 "Removing the Optical Engine and
3-21
CONFIDENTIAL
Revision:C