Epson EMP-1825 Service Manual page 79

EMP-1825/EMP-1815/EMP-1810
(EMP-1815/1825 only) After installing the IM Shield Plate and the IM
C A U T I O N
Fastening Plate to the IM Board Assy., attach the Gasket to the specified place
shown below in the direction of the arrow upward.
(EMP-1815/1825 only) When installing the IM Board Assy., be careful about
the following direction.
• Route the Cables from the RC board and the PBS Fan as shown in the figure
below.
SEIKO EPSON
IM Shield Plate
Gasket
10 x 10 (L=10)
Figure 4-42.
Figure 4-43.
4-36
CONFIDENTIAL
IM Fastening Plate
Revision:C