Epson EMP-1825 Service Manual page 73

EMP-1825/EMP-1815/EMP-1810 CONFIDENTIAL
Removing the IM Board Assy. (EMP-1825/1815 only)
4).Remove the screw (C.C.SCREW,3X6,F/ZN-3C) that secures the IM Board Assy.
5).Remove the three screws (C.B.P-TITE SCREW,2.5X10,F/ZN-3C) that secure the IM
Board Assy. and remove the IM Board Assy.
6).Disconnect the MA-IM Cable from the connector (CN1302) on the IM Board Assy.
7).Disconnect the SB-IM FFC Cable from the connector (CN1300) on the IM Board Assy.
8).Disconnect the USB Cable from the connector (CN30) on the USB Board Assy.
C.C.SCREW,3X6,F/ZN-3C
IM Board Assy.
MA-IM Cable
SB-IM FFC Cable
CN1300
CN1302
CN30
USB Cable
Figure 4-33.
SEIKO EPSON 4-30 Revision:C