Quick Connection Mode (Only When The Optional Wireless Lan Unit Is Installed); Steps For Connecting - Epson EB-Z8050W Operation Manual

EasyMP Network Projection Summary
Quick Connection Mode (Only when the optional Wireless LAN
unit is installed)
Quick Connection Mode only runs when you install the optional
Wireless LAN unit in the projector.
Quick Connection Mode temporarily assigns the projector's SSID to a
computer creating an ad hoc
network settings after disconnecting.
• You can easily connect to a computer and project images from the
computer without making network settings.
• This lets you connect easily without a connector cable, and you can
connect even if the projector and the computer are at remote locations.

Steps for connecting

Use the following steps to connect the projector to a computer and
project images using EasyMP Network Projection.
You need to perform steps 1 to 4 only the first time you connect.
1. Install EasyMP Network Projection on the computer to be connected.
p.6
s
2 Make network settings on the computer and put it into network
*1
connection status.
s
g connection, and restores the computer's
p.11
s
p.11
3. To use "Quick Connection Mode": Install the optional wireless LAN
unit on the projector. (if already installed, go to step 5)
To use "Advanced Connection Mode": Enable the Wired LAN adapter
*2
in "Port Configurations". s Computer's documentation
4. Make network settings on the projector and put it into network
connection status. s User's Guide "Network Menu (EB-Z8050W only)"
5. Start EasyMP Network Projection on the computer and connect with
the projector. s p.12
*1 If the computer you are using is already connected to the network, you
do not need to make network settings on the computer.
*2 Perform the access point and the router settings if necessary.
10