EMP-1825/EMP-1815/EMP-1810
4.3.3 Removing the Front Foot Unit/Rear Foot/Rubber Foot
Removing the Front Foot Unit
1).Press a screwdriver or similar tool into the small slot beside the Front Foot Unit, and take
out the Front Foot Unit.
Front Foot Unit
Removing the Rear Foot/Rubber Foot
1).Pull and rotate the Rear Foot to remove the Rear Foot.
2).Press a screwdriver or similar tool into the small slot beside the Rear Foot and pry out the
Rubber Foot from the projector Lower Case Unit.
SEIKO EPSON
Figure 4-6.
Figure 4-7.
4-12
CONFIDENTIAL
Rubber Foot
Rear Foot
Revision:C