Epson EMP-1825 Service Manual page 78

EMP-1825/EMP-1815/EMP-1810
(EMP-1815/1825 only) After the CF Shading Sheet is installed as shown
C A U T I O N
below, attach the Gasket (x2) to the circled places through the holes.
(EMP-1815/1825 only) Attach the USB Shading Sheet; B and the LAN
Shading Sheet as shown below aligning on the IM Board's surface. Attach the
Gaskets as shown in the figure below.
Gasket
(EMP-1815/1825 only) Before installing the IM Shield Plate, attach the BS
Sheet FIF, IM Shading Sheet, Connector Shading Sheet according to the red-
lined standard as shown in the figure below.
SEIKO EPSON
Gasket
5x5 (L=10)
Gasket
5x5 (L=10)
10 x10 (L=10)
IM Shading Sheet
BS Sheet FIF
4-35
CF Shading Sheet
Figure 4-39.
USB Shading Sheet; B
Figure 4-40.
Connector Shading Sheet
Figure 4-41.
CONFIDENTIAL
LAN Shading Sheet
Revision:C