Epson EMP-1825 Service Manual page 27

EMP-1825/EMP-1815/EMP-1810
Lamp or Temp indicator flashes orange: Warning
Indicator Status
Red Orange
High Temp Warn-
ing
Orange
Replace Lamp
SEIKO EPSON
ON Blink
Table 3-3. LED Indicator Status (Warning)
Projector
Status
(This is not an abnormality. However, if the temperature rises
too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are clear, and
that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it.
(refer to
the Air Filter Assy." (p.
Replace it with a new lamp.
If you continue to use the lamp after the replacement period has
passed, the possibility that the lamp may explode increases.
Replace it with a new lamp as soon as possible. (refer to
"Removing the Air Filter Assy." (p.
OFF Varies according to the projector status
Problem and Remedy
3.3.2 "Abnormality Check" (p. 10)
11))
3-5
CONFIDENTIAL
/ 4.3.2 "Removing
4.3.2
11))
Revision:C