Epson EMP-1825 Service Manual page 57

EMP-1825/EMP-1815/EMP-1810
4).Remove the screw (C.B.P-TITE SCREW,3X10,F/ZB-3C) that secures the Upper Case
Unit AJ from the top.
5).Remove the M3 Plate Nut from the Upper Case Unit.
6).Lift the Upper Case Unit carefully. (Three cables are connected to the MA Board. So, be
careful not to lift the case too much to avoid the damage to the three connector cables.)
M3 Plate Nut
C A U T I O N When connecting the cable to CN1203, be sure to lock the connector.
7).Disconnect the two connector cables from the connectors CN1201 and CN1204 on the
MA Board, and unlock the connector CN1203 and disconnect the Control Panel Cable.
SEIKO EPSON
Figure 4-10.
Figure 4-11.
4-14
CONFIDENTIAL
Upper Case
CN1203
Locked
Unlocked
CN1204
CN1201
Revision:C