Wired Lan's Operation Check (Emp-822/Emp-83 Only) - Epson EMP-822 Service Manual

3.3.11 Wired LAN's Operation Check (EMP-822/EMP-83 only)

Is Easy MP window displayed?
1. Restart the projector.
2. Re-configure the Easy MP
farmware by download it again.
Apply each remedy above from the top. If it does not work, go on to the next remedy.
For more information, refer to
Case" (p. 26) / 4.4.5 "Removing the Optical Engine and MAB set (2) (Optical Engine)" (p.
Flowchart 3-13 Wireless/Wired LAN's Operation Check (EMP-822/EMP-83 only)
SEIKO EPSON
EMP-822/EMP-83/EMP-X5/EMP-S5
Start
NG
NG
NG
END
4.4.2 "Removing the Optical Engine and MAB set(1) (MA Board Assy.) /IF
1. Is the connected-to-network simbol
displayed on PC's monitor?
2. Is the projector recognized on PC's
EMP monitor?
NG
1. Re-configure the network
with Easy MP.
NG
2. Check the setting of EMP
monitor on PC again.
NG
3. Replace Optical Engine
and MAB set.
3-23
39).
Revision:A