Epson EMP-1825 Service Manual page 82

EMP-1825/EMP-1815/EMP-1810
(EMP-1815/1825 only) When reassembling the USB Board Assy., attach the
C A U T I O N
USB Shading Sheet drawing out the connector's ribs from the hole as shown
in the figure.
(EMP-1815/1825 only) When installing the Conduction Plate; Fan, follow the
standard below
• Align it at an angle of 25°±5° from the bottom of the board as shown in the
figure below.
SEIKO EPSON
USB Shading Sheet
Figure 4-47.
Conduction Plate; Fan
Figure 4-48.
4-39
CONFIDENTIAL
Revision:C