Removing Other Main Parts; Removing The Inner Exhaust Duct A/Exhaust Fan Assy - Epson EMP-1825 Service Manual

EMP-1825/EMP-1815/EMP-1810

4.5 Removing Other Main Parts

4.5.1 Removing the Inner Exhaust Duct A/Exhaust Fan Assy.

1. Remove the screw (C.C.SCREW,3X6,F/ZN-3C) that secures the Lamp Connector, and
release the Lamp Connector from the Inner Exhaust Duct A.
2. Remove the three screws (C.B.P-TITE SCREW,2.5X10,F/ZN-3C) that secure the Inner
Exhaust Duct A, and remove the Inner Exhaust Duct A while drawing out the Safety Switch
from the hole of the Inner Exhaust Duct A.
3. Remove the Exhaust Fan Assy. from the Inner Exhaust Duct A.
Exhaust Fan Assy.
Inner Exhaust Duct A
SEIKO EPSON
Lamp Connector
Figure 4-55.
4-46
CONFIDENTIAL
C.C.SCREW,
3X6,F/ZN-3C
Safety Switch
Revision:C