Epson EMP-1825 Service Manual page 58

EMP-1825/EMP-1815/EMP-1810
4.3.4.1. Removing the Control Panel E/Lamp Lid Detection Switch
1. Remove the Control Panel E from the Upper Case Unit AJ.
2. Remove the screw (C.C.B-TITE SCREW,2X12,F/ZN-3C) that secures the Lamp Lid
Detection Switch, and remove the Lamp Lid Detection Switch from the Upper Case Unit
AJ.
3. Remove the following parts from the Upper Case Unit AJ.
• Upper Case Sheet
• PJ Lens Cushion B
• Sensor Sheet
• LG Shading Sheet
• Ferrite Core
• LED Lens (* EMP-1825/1815 only)
• LED Cushion (* EMP-1825/1815 only)
Cushion LED*
LED Lens*
SEIKO EPSON
Upper Case Sheet
Lamp Lid Detection Switch
Control Panel E
Figure 4-12.
4-15
CONFIDENTIAL
LG Shading Sheet
PJ Lens Cushion B
Ferrite Core
Revision:C