Table of Contents
Advertisement
First Images And The Most Important Settings
Activate the option Use this IP address/this range if the IP address of a particular camera
must be assigned manually (for networks with permanent IP addresses). Obtain the assigned
IP address, subnet mask and standard gateway from your network administrator and enter
the data. To reconfigure multiple cameras at the same time, all you have to do is enter the
range of IP addresses that includes the addresses of all of these cameras.
Make sure that the checkbox Store configuration in the camera is checked. This setting
ensures that the cameras are displayed with the correct network settings even after they
have been rebooted. Click on OK to close the dialog box.
Wait until MxControlCenter has changed the network settings and rebooted the cameras.
The status of the reconfigured camera changes from
Defining Additional Video Sources
In addition to the MOBOTIX cameras that are found automatically, you can also manually
add video sources to the list of video sources for MxControlCenter
Camera:
•
Here, you can enter the known IP address or DNS name of an MOBOTIX
camera or a third-party IP camera if it was not found by the automatic search
feature.
• MxPEG clip: Adds an MxPEG video clip previously recorded by an MOBOTIX camera
as a video source.
• recording path: Adds the path of an external file server where a MOBOTIX camera
has recorded audio/video data. The videos or images recorded at that location can
now be played back using the Player or Video Search.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
(Different subnet) to
(OK).
87
/126
Advertisement
Table of Contents
