Table of Contents
Advertisement
First Images And The Most Important Settings
Linux/Unix:
1.
Open a terminal as
2.
Enter the following command:
3.
The computer is now also using the IP address
Mac OS X:
1. Open System Properties > Network.
ethernet. In the Configuration field, select
2.
Select
Manual and enter a 10.x.x.x IP address (for example,
10.8.0.11).
Apply on the bottom right-hand side of the dialog
3.
Click
to assign the computer the IP address 10.8.0.11.
2. Set Up The Target Network Parameters Of The Camera:
1.
Open a Web browser on the computer and enter the default IP address of the
MOBOTIX camera in the address bar of the browser (for example, 10.8.0.99).
Pressing Enter displays the user interface of the MOBOTIX camera (see also Section
3.2.2 First Images And The Most Important Settings In The Browser).
2. Click the Admin Menu soft key in the user interface of the MOBOTIX camera. The
Quick Installation starts automatically once the admin
user has logged on.
3.
Hint: The Quick Installation can also be executed at a later stage by opening
Menu > Network Setup > Quick Installation (see also Section 5.2 Quick Installation
in the Camera Software Manual Part 2).
4.
Enter the target network parameters of the camera
on the appropriate page of the Quick Installation
assistant.
5.
Hint: The network parameters can also be accessed
at a later stage by opening Admin Menu > Network
Setup > Quick Installation.
6.
Once you have completed the Quick Installation and rebooted the camera, the
new network parameters will be activated. The camera can now be connected
to the target network and, if required, further configured.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
root user.
ifconfig eth0:1 10.8.0.11
10.8.0.11
81
/126
Default user data
User name:
admin
password:
meinsm
Admin
Advertisement
Table of Contents
