Table of Contents
Advertisement
Manual And Automatic Operation – Overview
3.1.1
Manually Using A Computer In The 10.x.x.x IP Address range
You can set up the camera's network parameters using a browser and the embedded
camera software. To do this, connect the camera to a computer or a network that is
using a 10.x.x.x IP address range (see Section 3.2.1 Manually Setting Up The Network
Interface). Once this has been completed, you can enter the camera's default IP address
in the browser address bar of the
computer (see Section 3.2.2 The First
Images And The Most Important
Settings In The Browser). Next, click
on the Admin Menu button to open
the camera's Quick Installation in
the browser's user interface. This
is where you can configure the
desired network parameters of the
camera. Once you have completed
the Quick Installation, you can
connect the camera with its new
network parameters to the desired
network.
Advantages
•
The camera does not need to be physically accessible, i.e. it can remain mounted
to a pole, for example.
•
There is no additional software required.
•
The network parameters can be set flexibly through manual entry.
Disadvantages
•
The computer or the network need to operate in the 10.x.x.x IP address range or
need to be able to access such a network.
•
The setup does not work automatically.
•
You need to know the relevant network parameters.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
77
/126
The default IP address
of your camera is printed
on a sticker on the
back of the camera
Advertisement
Table of Contents
