Table of Contents
Advertisement
62
/126
The folded drilling
templates can be found
at the end of the manual
Make sure that the
drilling template
is not scaled down
when printing
Silicon for rough
plaster
D14D Camera Manual: Mounting
Use the supplied drilling template (fold-out at the end of this manual) to mark the position
for drilling the dowel holes and the holes through which the cables will be led later on.
When printing or copying the drilling template, make sure that it is not scaled down.
screw anchors (10 mm), screws
1.
Use the supplied
(8x70 mm) and washers (dia. 9 mm) to secure the
Outdoor Wall Mount.
2. Attach the supplied wall sealing to the rear side
of the wall mount. If the Outdoor Wall Mount is
mounted to a very rough surface, the top of it
should be subsequently sealed against the wall
using silicon.
3.
The rectangular opening on the wall mount's rear side
is intended to cover the in-wall socket or the Outdoor
PatchBox.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Advertisement
Table of Contents
