Table of Contents
Advertisement
68
/126
Pole diameter:
60 to 180 mm
Available soon: Corner
and Pole Mount with
predrilled holes for the
Outdoor PatchBox
D14D Camera Manual: Mounting
2.5.3
Mounting To A Pole
Use the stainless steel straps supplied to affix the Corner and Pole Mount to a pole.
1. Guide the stainless steel straps through the
holes in the pole mount (see figure). Make sure
that you are using the slots of the mount which
are fitting best for the thickness of the pole. The
stainless steel straps allow the mount to be
attached to poles with diameters between 60
and 180 mm.
2.
Guide the
connection cables from behind
through one of the large round holes of the
Corner and Pole Mount. In order to properly
protect the cabling, you should let the cabling
run from the pole through the Corner and
Pole Mount directly into the camera. Note:
The cable length from the pole should be
at least 80 cm!
Firmly tighten the screws of the stainless steel
3.
straps. If required, clip the ends of the stainless
steel straps.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Advertisement
Table of Contents
