Table of Contents
Advertisement
86
/126
D14D Camera Manual: Operating The Camera
Cameras Are Found But Are Located In A Different Subnet
The symbols in the first column and the legend in the dialog indicate whether you can
access a particular camera directly from the MxControlCenter, which is the case for all
cameras designated with
located in a different subnet. This usually applies to new cameras or cameras that have
been reset to their factory settings.
MxControlCenter finds all MOBOTIX cameras, even when the computer and the
cameras are not located in the same subnet.
Once you have marked all of the desired video sources in the list with OK, you can now
select those that you wish to display and manage in MxControlCenter. The live image is
automatically displayed in the preview window when a camera is selected to help you
identify the cameras.
For cameras marked with Different subnet or if you want to add additional video sources,
follow the instructions in the following sections. You can also display the selected cameras
directly in a layout. For more information, see Section Creating A New Layout.
Reconfiguring Cameras In A Different Subnet
If one or more MOBOTIX cameras are displayed with the status Different subnet (for
example, cameras with a factory IP address), MxControlCenter automatically offers to
configure the network settings of these cameras. In this case, the application displays the
dialog box shown here after you have clicked on the "Add selected video sources" button.
Click on yes to configure the cameras to the subnet of your computer.
A DHCP server automatically assigns IP addresses for network devices in most networks
so that you can automatically select the default setting Get IP address automatically
(DHCP) in the Configure selected cameras dialog box.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
(OK) . Cameras designated with
Note
www.mobotix.com • sales@mobotix.com
(different subnet) are
Advertisement
Table of Contents
