Table of Contents
Advertisement
General MOBOTIX Camera Functions
•
Time Tables
that handle customized holidays and vacations are used to control the
camera's arming, image recording messaging, logos, the obscure image function
as well as other features.
•
remote signaling for master/slave cameras
the arming status of the slave cameras allows all slave cameras to be armed using
a key switch connected to the master camera for example.
Transfer profiles
•
allow easy control of transmissions via FTP, e-mail, phone calls,
and network messages.
•
Speakerphone*
allows you to speak via microphone, monitor the room via audio
and allows two-way communication.
Phone Call-In* remotely controls the camera using a touchtone telephone
•
camera information, establish an Internet connection, announce the retrieved IP
address, two-way communication, etc.).
•
MxPeG video compression and display
plug-in for Internet Explorer users brings all advantages of MxPEG to the browser-
based user interface, including the audio stream to and from the camera.
•
Routing
allows use of other network connections besides the standard route.
DynDNS client
•
for accessing the camera via the Internet using a symbolic name
(for example, mymobotixcam.dyndns.org) if the provider assigns a new dynamic IP
address every time the camera connects to the Internet.
Non-voidable backup system
•
software update fails, allowing the user to easily restart the update process.
enhanced startup options
•
of IP address and other network data, reset to factory default settings)
Notifications upon errors or when rebooting
•
or more notifications like blinking of the camera LEDs, audio message, FTP, e-mail,
phone call, network message.
extended security features
•
unauthorized access (IP-level access control, intrusion detection). They also provide
SSL-protected transmission of the video sequences and the data (using SSL encryption
and X.509 certificates).
Free Software Updates (www.mobotix.com)
MOBOTIX provides software updates free of charge at regular intervals that improve and
expand the camera's functionalities. Chapter 6, Software Update , in the Software Manual
provides more information on the process.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
, where the master camera controls
uses MxControlCenter or MxEasy. The ActiveX
starts the cameras in the original operating state if a
for the camera (obtain IP address via DHCP, announcement
provide a method for executing one
protect the pages and features of the camera and prohibit
27
* Telephony features
using VoIP connections
(Internet telephony)
(retrieve
Free-of-charge software
updates from
www.mobotix.com
/126
Advertisement
Table of Contents
