First Installation Steps; Mounting Lens Units - Mobotix D14D User Manual

50
/126
Possible image
sensor combinations
for the MOBOTIX
D14D (standard)
D14D Camera Manual: Mounting
2.3

First Installation Steps

2.3.1

Mounting Lens Units

The standard models in the MOBOTIX D14D family are supplied with a pre-installed dome.
Lens units (lens mount, image sensor and lens) are usually delivered separately. Lens units
are installed as described below if this is the case.
The sensor cables to connect the image sensors are marked with R (right) and L (left).
Depending on the type of sensor used, the sensors (mounted on the lens units) are marked
either by the RGB icon (color) or the SW icon (BW, black & white).
The following combinations of sensor cables (L, R) and sensors (color, black & white) are
possible:
Image Sensor Combination
Color/Color
Black & White/Color
Black & White/Black & White
Make sure that you only use the combinations of image sensors and sensor cables
listed in the table!
When setting up the camera, the installed combination of image sensors has to be
set in the camera's browser user interface. You can do so either automatically by
running the Quick Installation (Admin Menu > Quick Installation) or manually by
opening the Admin Menu > Image Sensor Configuration dialog box.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
RGB SW
Sensor cable L
Note
www.mobotix.com • sales@mobotix.com
Sensor cable R
l l
l