Table of Contents
Advertisement
Available D14D Accessories
1.7.4
ethernet Patch Cable With Bayonet Catch
Order No.: MX-OPT-CBL-LAN-1/2/5/10 (length 1 m/2 m/5 m/10 m)
The MOBOTIX-developed special cable can be
installed in a waterproof manner and has an
integrated sealing gasket. Every D14D camera is
delivered with a 0.5-m-long cable as standard,
which can be exchanged for a patch cable up to
10 m in length.
1.7.5
Outdoor Wall Mount
Order No.: MX-WH-Dome
When combined with the Outdoor Wall Mount, the
D14D is fully weatherproof and its protection class
increased from IP54 to IP65 (fully dustproof and
resistant to water jets).
1.7.6
Corner And Pole Mount
Order No.: MX-WH-Dome-ESWS
To install the Outdoor Wall Mount on a pole or the
corner of a building. This extremely robust mount is
made of 3 mm powder-coated stainless steel (white)
and has been designed specifically for outdoor use.
The supplied stainless steel straps allow the mount to
be attached to poles with diameters between 60 and
180 mm.
1.7.7
ExtIO Function Expansion
Order No.: MX-ExtIO
The device, which is suitable both for on-wall and in-wall
installations, contains a powerful speaker, microphone,
infrared motion sensor, ambient temperature sensor,
two input and two output contacts and two illuminated
buttons. It is ideal for door communication, elevators,
access control, etc. The ExtIO is suitable for use as direct
connection to the D14D via a Mini USB cable (max. 5 m),
which can be ordered separately, or as a network
connection via the PoE switch.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
41
/126
Advertisement
Table of Contents
