Table of Contents
Advertisement
Mounting The Camera With Outdoor Wall Mount
2.4.3
Aiming The Camera
The camera can be installed once the Outdoor Wall Mount has been mounted to the
wall or pole. The bottom plate closes off the outdoor wall mount from below and also
holds the camera.
The upper side of the bottom plate has 24 holes for the M4 stainless steel hex nuts. It is thus
possible to mount the camera in increments of 15 degrees. All holes have been numbered
from 1 to 8 in order to facilitate the mounting process.
Three standard positions to aim the camera are described below:
1. PIR sensor of the camera looks straight ahead: Only use
the holes numbered with 1 for the M4 hex nuts.
2. PIR sensor of the camera looks to the right: Only use
the holes numbered with 3 for the M4 hex nuts.
3. PIR sensor of the camera looks to the left: Only use the
holes numbered with 7 for the M4 hex nuts.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
63
/126
The bottom plate closes
off the Outdoor Wall
Mount from below and
also holds the camera
PIR looking
straight ahead: 1
PIR looking
to the right: 3
PIR looking
to the left: 7
Advertisement
Table of Contents
