Table of Contents
Advertisement
Overview Of Network Connection
2.2.2
Uninterruptible Power Supplies (UPS)
In order to maintain a continuous power supply even when utility power fails, you should
install an uninterruptible power supply (UPS). These devices also provide full protection
against electrical surges and voltage fluctuations and thus enhance the reliability of the
system as a whole.
When using a more powerful 19" rack-mounted UPS, you can also protect all other network
components (e.g. switches, routers, PoE switches, etc.).
Since MOBOTIX cameras do not require any heating, even during winter, the average
power consumption of less than 5 watts is very low. This, in turn, means that you can
centralize the UPS-protected power supply by injecting power into the Ethernet cables
(max. 100 m). This kind of protected power supply can be used either with MOBOTIX PoE
products (MX-NPA-PoE with Universal Power Supply) or with PoE-compliant switches
according to IEEE 802.3af.
Poe switch
PC/server
RAID
UPS
2.2.3
Providing The Camera Connections, Wall Outlets
Once the camera position, the position of the cable outlets and the method of power supply
have been decided upon, the cabling can be installed. Before mounting the MOBOTIX
D14D, you should make sure that the network connections have been properly tested, so
that the proper functioning of the camera is guaranteed.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
47
/126
Advertisement
Table of Contents
