Table of Contents
Advertisement
76
/126
Download the
free-of-charge MxEasy
and MxControlCenter
software at
www.mobotix.com
Camera software
in the browser
D14D Camera Manual: Operating The Camera
3
OPERATING THE CAMERA
3.1
Manual And Automatic Operation
MOBOTIX cameras do not require any extra software. Thus, you can set up and operate
the MOBOTIX camera using a JavaScript-enabled browser on all common operating
systems (such as Windows, Linux, Macintosh, etc.). As an alternative, you can also use
the MOBOTIX applications MxControlCenter and MxEasy. Follow these steps in order to
set up the camera:
Connect the camera to the network.
1.
cable (see Chapter 2)
Set up the camera's network interface:
2.
Manually using a web browser
•
Automatically using MxControlCenter/Mxeasy
•
or via DHCP (see Section 3.2.6)
3.
Configure the camera
or with MxEasy.
Every MOBOTIX camera comes preconfigured with a fixed IP address in the 10.x.x.x range
(for example, 10.8.0.99). Local computer networks usually have IP addresses in the
172 or 192 ranges. In order to access a MOBOTIX camera via the network, the camera
needs to get an IP address in the same address range. You can set up the network
parameters of the MOBOTIX camera using one of the following methods: Manually,
using MxCC and Mxeasy or by DHCP.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
– Overview
Power is supplied directly via the Ethernet
(see Section 3.2.1 f)
using the browser-based user interface, with MxControlCenter
www.mobotix.com • sales@mobotix.com
(see Sections 3.2.3 and 3.2.4)
Advertisement
Table of Contents
