Table of Contents
Advertisement
74
/126
The IP addresses in
the diagram are shown
only as an example
For the D14D, you
should use the new blue
MX-NPA-PoE-Set –
previous MOBOTIX
network power
accessories such as the
NPA Set, Power Box,
and Power Rack
(MX-NPA-Set,
MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with the D14D
The IP addresses in
the diagram are shown
only as an example
D14D Camera Manual: Mounting
2.7.4
Power Supply When Connected Directly To A Computer
1.
Connect the factory pre-installed cable of the camera to the
the PoE adapter.
PC/Power connector of the PoE adapter to the Ethernet port of the
2.
Connect the
computer.
3.
Plug the RJ45 connector of the power supply unit into the
of the PoE adapter.
Power supply
2.7.5
Power Supply With Power-Over-ethernet Products
Connect the factory pre-installed cable of the camera to the Ethernet connector of the
PoE switch/router. The switch/router must support the PoE standards IEEE 802.3af or IEEE
802.3at.
LAN/www
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
PoE Adapter
(MX-NPA-PoE)
Camera
RJ45
Camera
(10.8.0.99)
PoE/PoE+
switch/router
Camera
(10.8.0.99)
www.mobotix.com • sales@mobotix.com
Camera connector of
LAN/Power connector
PC
(10.8.0.11/255.0.0.0)
PC
(10.8.0.11/255.0.0.0)
Advertisement
Table of Contents
