Table of Contents
Advertisement
100
/126
If the default settings
for the camera have
been changed, the
configuration for the
panorama view must first
be activated (see Step 3)
D14D Camera Manual: Operating The Camera
3.4.2
Adjusting The Panorama Image (D14D 180° Only)
The D14D 180° with integrated panorama function has two 90° wide-angle lenses that
are mounted on a lens bridge in such a way that they produce a 180° dual image. The
two individual images do not always fit together completely and seamlessly because of
the mounting position of the individual cameras and the lens adjustment.
Make sure that the camera is not tilted too far down to ensure that you get a good
panorama image. The image area that is most interesting for the viewer should be
in the center of the image so that the camera creates an image that is as close to
reality as possible.
You need to follow these extra steps when installing a D14D 180° to create a good combined
image from the two single images (left and right image sensor).
Step 1: Activating The 180° View
Open the user interface of the camera in the browser. Click on the Camera Selection Quick
Control above the live image and set the value in the field to the right to 180° View.
Step 2: Image Adjustment Using OnScreen Control
An Onscreen Control with three different control elements appears on the upper left-hand
side of the live camera image. Using these elements, you can adjust the two individual
images to form the desired panorama image. The adjustment is automatically carried out
in VGA mode, regardless of the current resolution. After the Onscreen Control is hidden, the
live image returns to the original resolution.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Note
www.mobotix.com • sales@mobotix.com
Advertisement
Table of Contents
