Names And Functions Of Parts; Front Panel; Phones Jack - Sony XDS-PD1000 Operation Manual

Names and Functions of
Parts

Front Panel

The names and symbols of buttons and knobs on the front
panel are color coded according to function.
White: Function when the button or knob is operated
independently.

1 PHONES jack

2 LEVEL adjustment knob
3 On/standby (1) button and indicator
8 KEY INHI switch
4 Audio level adjustment section (see page 20)
a PHONES jack
This is a standard stereo jack. Connect stereo headphones
to monitor the audio during recording and playback. (Non-
audio signals are muted.) The monitored channel is
selected with MONITR L and MONITR R on the HOME
page of the function menu (see page 48).
18
Front Panel
4 ALARM indicator
5 INTERNAL ACCESS indicator
6 MAINTENANCE connector
2 Disc control section
(see page 20)
5 Display/menu control
section (see page 21)
Chapter
Orange: Function when the button is operated with the
SHIFT button held down.
Blue: Function related to thumbnail operations.
7 REMOTE button
1 Port and media selection section (see page 19)
3 Memory card slots (see page 20)
7 Shuttle/jog/variable-speed playback
control section (see page 23)
6 Recording and playback control section (see page 22)
b LEVEL (volume) adjustment knob
Adjust the volume of headphones with this knob. You can
also cause this knob to simultaneously adjust the output
volume from the ANALOG AUDIO MONITOR/
OUTPUT2 R/1, L/2 connectors on the rear panel. To do
this, set setup menu item 114 AUDIO MONITOR
OUTPUT LEVEL to "variable".
2