Names And Locations Of Parts; Front Panel - Sony RM-PP1 Operation Manual

Names and Locations of Parts

Names and Locations of Parts

Front Panel

1 POWER switch
1 POWER switch
When pressed on the ON side, starts this unit and
lights the LCD display window.
2 LCD display window
Displays edit points, menus, the status information
(including the initialization message), the operation
mode, and error messages.
• Edit points display
Edit points set or being set are displayed as shown in
the figure below.
I N 0 0 : 0 0 : 0 0 : 0 0
O U T 0 0 : 0 5 : 0 0 : 0 0
• Menu display
The setup menu item set or being set is displayed as
shown in the figure below.
R E F S E L E C T
R E F I N P U T
For more information about the setup menu, see page 12.
2
2 LCD display window
3 Status indicators
4 J/j buttons
5 MENU button
6 ENTER button
<
9 Keypad buttons
8 DELETE button
7 IN/OUT/DUR buttons
• Status information
A message informing the status of this unit is
displayed as shown in the figure below.
P r o g r a m P l a y B o x
V e r .
The lower row shows the following messages
depending on the status.
Message Status
INITIALIZE The settings of this unit are being
initialized.
a)
Ver 1.00 Usual state
ABORT Edit operation stops.
Edit During an edit
Ready Ready for an edit (The edit points,
duration or time adjustment rate have
been set correctly.)
Review During review
Preview During preview
OK Edit, review or preview operation
completes.
Error An error occurs.
a) System software version of the unit
qs AUTO EDIT button
qa STOP button
0 PREVIEW/REVIEW button