Sony XDS-PD1000 Operation Manual page 115

Item number Item name
319 PREREAD SELECT
320 DIGITAL AUDIO PB PROCESS ON
EDIT POINT
329 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH5
330 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH6
331 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH7
332 ANALOG AUDIO EDIT PRESET
REPLACE FOR CH8
a) When the optional XDBK-105 is installed and maintenance menu item M397 PORT CONFIGURATION is set to "VTR mode".
Item number Item name
501 STILL TIMER
Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number Item name
601 VITC POSITION
a)
SEL-1
Menu items in the 300s, relating to editing operations
Settings
a)
Select the preread operation.
audio/video [a/v]: Preread for both audio and video.
audio: Preread for audio only.
video: Preread for video only.
Specify the handling of audio at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit
point).
fade: Fade out and fade in.
Select methods for setting the edit presets of the digital audio channels
a)
CH5 to CH8 of this unit. Make these settings when using an editor
(PVE-500, BVE-600, etc.) or remote control unit without a function to
control digital audio edit presets.
a)
The edit presets of the digital audio channels of this unit are turned on
and off according to the specified analog audio presets of the editor or
a)
remote control unit.
no definition [nodef ]: No definition
analog ch1 [ch 1]: Follow the edit preset of analog channel 1.
a)
analog ch2 [ch 2]: Follow the edit preset of analog channel 2.
analog ch1+ch2 [ch1+2]: Follow the edit preset of analog channel 1 or
2.
Menu items in the 500s, relating to the disc drive
Settings
To protect the media against shock and vibrations, and to lengthen the
life of the laser diodes, the unit automatically enters standby off mode
whenever a specified time elapses in a media stop mode (stop mode or
the still picture mode of search mode).
This allows you to set the time after which the unit exits a media stop
mode and enters standby off mode.
0.5 sec [0.5 s] to 8 min [8 m] to 30 min [30 m]: Can be set in the range
from 0.5 seconds to 30 minutes.
off: Do not put into standby off mode.
Settings
In 59.94i/59.94P/ Select the line into which to insert VITC signals (SD output)
29.97P mode 12H to 16H to 20H: Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to "auto" and the
VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to "auto" and
the VITC insertion line is set to line 20.
In 50i/50P/25P Select the line into which to insert VITC signals (SD output)
mode 9H to 19H to 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
115
Setup Menu