Memory Card Slots; Memory Button; Eject Buttons; Disc Control Section - Sony XDS-PD1000 Operation Manual
Professional media station
Hide thumbs
Also See for XDS-PD1000:
- Operation manual (161 pages) ,
- Operations & installation manual (60 pages) ,
- Brochure & specs (28 pages)
Table of Contents
Advertisement
Even when a clip list screen is displayed, pressing this
button switches the output signals of the video monitor
output connectors to playback video signals.
c INTERNAL (internal storage) button
This button selects internal storage as the operation target
media.
d DISC button
This button selects a Professional Disc as the operation
target media.
e MEMORY button
This button selects an SxS memory card as the operation
target media.
f Slot selection lamps
These light to indicate the selected memory card slot.
2 Disc control section
4 EJECT button
3 Disc slot
2 DISC IN indicator
1 DISC ACCESS indicator
a DISC ACCESS indicator
This lights when the Professional Disc is accessed.
Note
While the DISC ACCESS indicator is lit, do not turn off
the main power switch on the rear panel or disconnect the
power cord.
This could lead to a loss of data from the disc.
b DISC IN indicator
This lights when a Professional Disc is inserted.
c Disc slot
Insert a Professional Disc in this slot (see page 52).
d EJECT button
To remove the Professional Disc, press this button (see
page 52).
3 Memory card slots
1 Memory card slots
2 Eject buttons
3 MEMORY ACCESS A/B lamps
a Memory card slots
These two slots (A and B) can receive SxS memory cards
(see page 54).
b Eject buttons
To remove the SxS memory card from the slot, press the
eject button to release the lock, then press the button once
more. This makes the media come out of the slot partially
(see page 54).
c MEMORY ACCESS A/B lamps
Indicate the state of slots A and B (see page 54).
4 Audio level adjustment section
1 CH-1/ALL CH, CH-2 to CH-4 adjustment knobs
2 VARIABLE switch
a CH-1/ALL CH, CH-2 to CH-4 (audio level)
adjustment knobs
Depending on the setting of the VARIABLE switch, these
adjust the input audio or playback audio levels of channels
1 to 4.
You can adjust levels of channels 5 to 8 using the function
menu. For details, see “P3 AUDIO page” (page 50).
By the setting of setup menu item 131 AUDIO VOLUME,
you can enable the CH-1/ALL CH adjustment knob to
simultaneously adjust all eight channels. When this
simultaneous adjustment is enabled, the ALL CH indicator
lights.
Page 20
- Quick Links:
- Error Messages
Hide quick links:
Advertisement
Table of Contents
