Front Panel Tilt Mechanism - Sony XDS-PD1000 Operation Manual

Front Panel Tilt
Mechanism
The front panel of this unit has a tilt mechanism that allows
you to pull the front panel out and adjust it to a convenient
angle.
Note
Do not adjust the tilt during recording, playback, or
copying. Shocks or vibrations can affect the internal
storage, preventing normal recording, playback, or
copying.
Before adjusting the tilt, be sure to put the unit into stop
mode.
To pull the front panel out
Press and hold in the lock release buttons on both sides of
the front panel, and pull in the direction of the arrow.
You can fix the angle of the front panel in position 1 (40
degrees), position 2 (65 degrees), or position 3 (90
degrees).
36

Front Panel Tilt Mechanism

The angle cannot be fixed if you pull the front panel past
position 3 all the way out to the return position. To fix the
front panel, return it to position 0 and then pull it out to the
desired angle.
To return the front panel to its original
position
Unlock the front panel by pulling it out to the return
position. You can then return it to position 0.
To change the angle of the front panel
To change to a larger angle, pull the panel up to that angle.
To change to a smaller angle, pull the front panel all the
way up to the return position, releasing the lock. Then
return it to position 0 and pull it out again to the desired
angle.
Return position
Position 3 (90 degrees)
Position 2 (65 degrees)
Position 1 (40 degrees)
Position 0
Note