Table of Contents
Advertisement
Other Functions
Adjusting the sound
characteristics
You can adjust the balance, fader, low pass filter
and subwoofer volume.
1
Press (SEL) repeatedly until "BAL,"
"FAD," "LPF" or "SUB" appears.
Each time you press (SEL), the item changes
as follows:
LOW*
1
t MID*
1
t HI*
BAL (left-right) t FAD (front-rear) t
LPF (low pass filter)*
SUB (subwoofer volume)*
AUX (AUX level)*
5
*1 When EQ3 is activated (page 18).
*2 When "SUB" is selected (page 17).
*3 The cut off frequency is adjustable to 78 Hz,
125 Hz or OFF.
*4 The volume level is adjustable between –10
and +10 steps. (Below –10, "ATT" is displayed.)
*5 When "AUX–ON" is activated.
2
Press the volume +/– button to adjust
the selected item.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
Press (ATT).
After "ATT-ON" momentarily appears,
"ATT" appears in the display.
To restore the previous volume level, press
(ATT) again.
1
t
2
3
t
*
2
4
t
*
Changing the sound and
display settings
The following items can be set:
1
• SUB/REAR*
— to switch the audio output
SUB or REAR.
– Select "SUB" to output to a subwoofer.
– Select "REAR" to output to a power amplifier.
• AUX*
1
(page 18)
• A.SCRL (Auto Scroll)*
1
• DEMO*
— to turn the demonstration display
on or off.
– Select "ON" to activate the demonstration
display (The demonstration starts about 10
seconds after the unit is turned off).
– Select "OFF" to deactivate the
demonstration display.
• BEEP*
3
— to turn the beeps on or off.
1
• PAL/NTSC*
— to change the TV colour
system to PAL or NTSC.
• DIM — to change the brightness of the display.
– Select "ON" to dim the display.
– Select "OFF" to deactivate the Dimmer.
Switching the SUB/REAR*
Press (SEL), then press the volume +/–
button.
After 3 seconds, the display returns to normal
play mode.
Selecting the desired item
Press (SEL) and the desired button
simultaneously.
(SEL) + (3): A.SCRL*
(SEL) + (4): DEMO*
(SEL) + (6): BEEP*
(SEL) + (MODE): PAL/NTSC*
(SEL) + (DSPL): DIM
After the mode setting is complete, the display
returns to normal play mode.
To cancel the item, press (SEL) and the desired
button simultaneously again.
*1 When the unit is turned off.
*2 When CD is played.
*3 The beep sound is output only when the built-in
amplifier is used.
2
(page 14)
1
2
1
3
1
17
Advertisement
Chapters
Table of Contents
