Sony XDS-PD1000 Operation Manual page 123

Item number Item name
926 5 PROGRAM NUMBER
6 OUTPUT MODE
7 PACKET LENGTH
8 META PACKET OUT
9 PID(PMT)
10 PID(PCR)
11 PID(VIDEO)
12 PID(AUDIO)
13 PID(AUX1)
Menu items in the 900s, relating to digital process
Settings
Specifies a DVB-ASI input/output signal program number.
1 to 100 to 65535: Sets the program number (decimal).
You can set this in units of 1 (or 200 when the SHIFT button is held
down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Selects the output mode.
Packet [packt]: Packet mode
Burst: Burst mode
Selects the packet length.
188Byte [188B]: 188 bytes
204Byte [204B]: 204 bytes
Specifies output of DVB-ASI TS signal metadata packets.
on: Output metadata packets.
off: Do not output metadata packets
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Changes the PMT packet PID value for DVB-ASI output.
30 to 81 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value in 1 units (or 200 units, when the SHIFT button
is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
Changes the PCR packet PID value for DVB-ASI output.
30 to 134 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value in 1 units (or 200 units, when the SHIFT button
is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
Changes the VIDEO packet PID value for DVB-ASI output.
30 to 810 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value over the range from 30 to 1FFE in 1 units (or
200 units, when the SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
Changes the AUDIO packet PID value for DVB-ASI output.
30 to 814 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value over the range from 30 to 1FFE in 1 units (or
200 units, when the SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
Changes the AUX1 packet PID value for DVB-ASI output.
30 to 815 to 1FFE: Set PID value (as a hexadecimal value).
You can set the value over the range from 30 to 1FFE in 1 units (or
200 units, when the SHIFT button is held down).
- - -: When sub item TS MODE of menu item 926 is set to "HDV".
Note
Do not use the same PID value as for any other sub-item.
123
Setup Menu