Maintenance Menu Operations - Sony XDS-PD1000 Operation Manual

Item
D0: DRIVE MAINTENANCE
D1: SSD/HDD
D11: RAID
D12: RESET SSD/
HDD CFG
D13: FORMAT

Maintenance menu operations

This section describes the indications in the maintenance
menu and how to change the settings.
To display the maintenance menu
Holding down the PAGE/HOME button and the SHIFT
button, press the MENU button.
The maintenance menu appears on the video monitor
screen and the currently-set menu item is displayed in
reverse video.
Meanings of indications on the menu
screen
On-screen indication Meaning
Right-pointing arrow Pressing the PUSH SET knob or
(c) at the right of a the b button switches to the next
menu item lower menu level or to a setting
selection screen.
Left-pointing arrow (C) Pressing the PUSH SET knob or
at the left of a menu the B button switches to the
item previous (higher) menu level.
Character string at the Current setting of the menu item
right of a menu item When shown with a colon (:): the
When shown with a raised dot
An * (asterisk) in a Factory default setting
complete list of settings
To change a menu item setting
Carry out the following operations to change the setting.
M6: DRIVE: Items relating to drive settings
Setting
Perform maintenance on the Professional Disc drive.
Specify whether to install the optional XDBK-102 or XDBK-107.
on: Install.
off: Do not install.
Initialize internal storage settings when an optional XDBK-107 is installed.
Push the SAVE function button (F5): Initialize the settings.
Push the MENU button: Return to the next highest menu level without executing the
initialization.
Note
Initializing settings will erase all clips from internal storage.
Format (initialize) the internal storage.
Push the SAVE function button (F5): Format (initialize).
Push the MENU button: Return to the next highest menu level without executing the
format.
current setting is the same as
the factory default setting.
(.): the current setting is
different from the factory
default setting.
For information about how to change network settings see
next section "To change network settings".
MENU button
Function buttons
SHIFT button
PAGE/HOME button
1
Use the PUSH SET knob or the V and v buttons to
select the required item, then press the PUSH SET
knob or the SELECT function button (F2).
The sub-items of the selected item appears.
2
Select a sub-item with the same operation as step 1,
and use the PUSH SET knob or the V and v buttons to
change the setting.
3
Press the PUSH SET knob or the SELECT function
button (F2) to confirm the setting change.
4
Press the SAVE function button (F5).
The message "NOW SAVING..." appears on the video
monitor screen, while the new settings are saved in
memory. When the saving operation is completed, the
video monitor screen returns to its normal indications.
Arrow buttons
PUSH SET knob
Maintenance Menu
133